![]() ![]()
|
||||||||
![]() ![]() ![]() |
||||||||
|
TEL: 0870 879 0900 ![]() Gas Courses
in Manchester, London, Scotland, Birmingham, Essex, Liverpool, Kent &
Locations throughout the U.K.
CTS Group Training Registered over 135 Engineers with Gas Safe
Register in 2009, From Scotland to Cornwall, With an average training
period of 3 to 9 months on and off job all of our trainees were
successfully registered to work on Gas, the majority in self employed
positions on the Corgi, then Gas Safe Register.
![]() Taking Your ACS
Certificates
![]() Gas Safe
Courses throughout the UK, including London, Manchester, Essex,
Scotland, Wales, Surrey, Kent, Devon, and all regions.
![]() Engineer
Assessment on Site
![]() Gas Safe
Training Centres in Manchester, London, Glasgow, Yorkshire, Poole,
Norfolk, Liverpool, Birmingham, Kent, Essex, and throughout the UK.
![]() ACS Centre
Assessment
![]() Gas
Engineer Training Courses on and off in London, Essex, Kent, Sussex,
Surrey, Manchester, Scotland and Wales
Testimonials
2007/8
"I had done a
lot of DIY, but this was a career change for me. My training was concise
and what I liked the most was that although CTS supplied the tools, I
was doing all the work myself, the experience was invaluable. I was
supported throughout the whole registration process and now run my own
successful business. Thank you to all at CTS."
![]() " I was able to train around my existing job, so the transition was easy. I was also able to fund my training as I went along, so I was in charge of the time schedule too. I came back 6 months later to complete a plumbing course too as my work began to expand out of gas."
"There were no contracts to sign or work placements to try and get, especially at my age. What's more I didn't have to pay all the fees up front so I was able to keep in charge of my training schedule throughout, What was most incredible was that i did not have to undertake a plumbing course first as i chose to be trained in the field by one of CTS own field Trainers"
"When I started my corgi gas training, I didn't know how I was going to achieve all I wanted to achieve. CTS Consultants helped me with my business plan, advertising, web site, training, assessments and Corgi Registration. The training and support was everything I wished for. What's more I was earning an income whilst I was training too, incredible. I highly recommend that if you are a mature student looking to start your own gas maintenance business, call these guys, they are everything they say they are"
"When I had completed my training I had done it over a very short period of time and naturally needed more confidence. CTS Consultants Set me up with some solo jobs and sent out an independent Corgi Registered verifier to confirm I was ready to work in the field. He was all praise for my training and competency. CTS then started me on their own kick start program and I got my corgi card working with full technical support, I got tools, and uniform and job sheets, and their inspectors came out to check my work. I can't say thank you enough"
Graham, Corgi Reg'd 2008, Bedford "I did the full business start up scheme with CTS Consultants Ltd. First I got my theory and practical training. This was all done one on one on real jobs. I was then assessed by an external verifier, and went on to sit my ACS Assessments at one of CTS Consultants Centres. I received my certificates shortly afterwards. CTS then put me on their kick start scheme, I got my corgi registration and CTS then started to feed me work. They advised me and helped me build up a repeat business customer base, taught me how to price my jobs and sell my services, I then went on to take their boiler repairs and maintenance program. This is better than any Franchise, and I am looking to take on staff of my own now" "I opted to do the distance learning course which was very simple to understand and allowed me all the time i needed to complete the modules at my own speed. The best thing about this was that i was able to go back over the lesson as often as i wanted to gain a greater understanding. My tutor was only a phone call away and always answered any questions i had. My centre practical days were very exciting, but the best part of the course was the on job training. I have to admit i was exhausted at the end of each training session, but it was all on gas. The Trainer handed me the tools, we talked about the jobs i would be doing, and then i did them all myself. This was an incredible confidence boost for me, and i know i couldn't have gained so my experience and professional knowledge so quickly without choosing this option. A Big Big Thank you to CTS. I would recommend this course to anyone".
Keith, Corgi Reg'd
2008 - Kent
"Excellent
Training, Excellent Support, Excellent!"
Phil, Corgi Reg'd
2007 - Kent
"If you
actually want to be in business, doing the job, and earning money even
whilst you are training this is not just a training scheme this is a
real business opportunity. Don't just take my word for it"
And Finally
We are a small but very specialist firm training and setting up in business a very small portion of successful gas engineers in the UK every year. We are usually oversubscribed, and early enquiries are always recommended. To save us wasting each others time, we have purposefully put our minimum and maximum costs for you to see. More importantly, we will offer support in your training, help build your self confidence and show you how we made it to the top so we can meet you there. So unless you really want to do this, unless you have the drive and commitment, and desire to see this through there is little point in us talking or wasting each other's time. The rewards on the far side of this program are incredible, and the cost of the schemes in relation to this are far out-weighed by this. If you are looking for a cheap way of getting registered then go to the google bar to the right and type in gas training again. We offer a story of success, and in order to meet with success you have to learn from the Best, Agreed ? We are not advertising courses you think you can afford, we are offering schemes that get you where you REALLY want to get! Not where you think you can ! We are currently providing gas training in Glasgow, Edinburgh, Aberdeen, London, Manchester, Birmingham, and all parts of England, Scotland and Wales. Field Training with CTSGroup On Job Training with CTSGroup Gas Training with CTSGroup
For details of our Plumbing Courses or Part P Electrical Training call now on the number below. CTSGroup Gas Training 0800 118 5928 To speak to any of our past trainees just call us on our free phone number.
We have real trainees and ex-corgi and gas safe gas trainees who you can contact and ask their opinion. CTSGroup leading the way in gas safety awareness courses, corgi gas training and gas safe training courses anywhere in the UK, with real field training for all our gas safe courses, and gas safety awareness programs. Call us now on 0870 879 0900 anytime.
|
Corgi, Gas Safe Courses, Throughout England , N & S Ireland, Scotland & Wales CTS Group (Complete Training Solutions) are a leading Category 2 and Category 3 New entrants gas training provider for gas safe courses, field training and assessment, portfolio building, quality assurance engineer training and gas safety advise and awareness presenter for the Health and Safety Executive in the UK. If you have been considering a gas safe course to enable entry on to the national gas safe register (used to be Corgi) as a gas boiler repair technician, service or maintenance engineer, or would like to improve your skills as a gas safe registered Quality Assurance Inspector, or Gas Safety Management Advisor, then one of our Entry To Gas Training Courses or our Full Gas Safe Course for Category 2 or Category 3 mature students is all you will need. We provide the most exciting 1 stop professional tailor made corgi, gas safe training courses, offering success to anyone keen to take up a serious role in this industry as a corgi, gas safe engineer, and that's not all. It is our promise to assist you in achieving your Goal to become one of this country's top leading 10% of Gas Safe Engineers. Employed, or Self employed, you chose. Our flexible gas safe training courses are tailored to provide all the essential ingredients needed to become a gas safe registered engineer, employable with references and evidence of skills, or evidence of field assessment (on job assessment by a gas safe inspector) to prove competency in the real world, and enable Solo registration. CTSGroups' Gas Safe Training courses offer a 1 stop shop for a small and select number of engineers and related people wanting to be successful in this industry. Because we only have 4 national trainers our numbers are always limited. Early enrolment is always recommended. CTS Group (CTS Consultants Ltd) have been running this specialist scheme successfully for over 3 years as an answer to the engineers wanting to get more than just a certificate, and wanting to turn their training into a real business or job offer with a real income. Our students have voted us the Number 1 Corgi Gas Training, Gas Safe Course Provider by all our new students. Look on the panel at the left to see what some have said. CTS are also providing bespoke Gas Safety Awareness Programs for local authority, Housing Association, Letting agency, and other role related personnel requiring a more secure and informed approach to gas safety. ACS Revision Test Exams Pay As You Go Gas Safe Registration Course Client Building Schemes
With Corgi, Gas Safe Training Centres, Field Trainers and Assessors throughout England, Scotland, and Wales,
gas safe training resources in London, Essex, Hertfordshire, Kent, Sussex,
Berkshire, Hampshire, Somerset, Cornwall, Cardiff, Newport,
Chester, Cheshire, Glasgow, Edinburgh, Aberdeen, Kent, Bedfordshire,
Birmingham, Manchester, Liverpool, Yorkshire, Cornwall, Devon,
Nottinghamshire, Northamptonshire, Norfolk, Lincolnshire, Suffolk,
Cumbria, Stirlingshire, Lanarkshire, Aberdeenshire and throughout Wales,
we have been voted the Best Category 2 and Category 3 Gas Safe Course
provider.
CTS Consultants
Ltd are in our belief the only Gas Safe Course and Corgi Gas Training Provider in the UK, offering
their clients a complete choice of tailor made 1 stop gas training
options from where
they are right now in a time period of their choice up to successfully
earning an income running their own corgi, gas safe registered, gas
heating maintenance and installation business, or being employed by a
gas safe registered maintenance company. Now with our
"Pay as You Go" Open Learning
Programme anyone can start TRAINING RIGHT NOW,
and pay their course fees at their own rate from just
£55
per lesson. Not only that but now you can chose the days you want to train over
a period that suits you both on job, and off job in centre. In
addition to our popular gas safe courses,
We also run a number of
tailored plumbing courses, and electrical courses for engineers wishing
to expand their skills. For Companies just needed to train their staff
in gas safety awareness we offer purpose designed courses to meet the
individual needs of all our future clients.
CTS Consultants Ltd, Taking care of all your Gas, ACS,
and Heating/Boiler training arrangements on and off site wherever you
are in the country
Training in Scotland, England, & Wales in all counties in
and around centres close to you. Gas Safety Awareness programs can be
offered in house, in our premises or online.
![]() ![]()
When it comes
to corgi gas training, gas safety awareness, and gas safe courses, CTSGroup have been leading
the way with fully functional gas safe courses that integrate the most
important and truly fundamental part of the training process. Let's face
it, anyone can attend a college or training centre and undertake a gas
safe course, but not everyone is going to be fortunate enough to be
trained where it matters, On the Job, in the field. It is not just
a case of completing your theory and practical, then building a
portfolio unless you are already employed by a gas company who are doing
your 'Real Training'. This has meant that most training
providers are leaving their students to find a way of building
portfolios rather than undergoing actual training in the field. Most
work placements result in little if any experience.
The
other important factor is that without a qualified Gas Safe Assessor to
confirm your competency on the job in the field over the full scope of
the gas safety installation and use regulations, many engineers are
entering the field and applying for gas safe registration without any
where near sufficient understanding and solo field skills, and this is coming to light very
soon after completion of the courses when the engineer tries to get a
job, or in fact register with gas safe. Gas Safe Register have been appointed by the
Health and Safety Executive
as the new body running the gas registration and gas safety awareness
scheme.
CTS Consultants Ltd (CTSGroup) are consistently exceeding our clients'
wildest dreams. Operating the most unique gas safety awareness training, corgi gas training, gas
safe courses and kick start gas safe registration scheme anywhere in the UK. Our Gas Safe Courses all
centre around one to one on the job field training and assessment on all the gas safety skills
needed to undertake this field of work. This means that our engineers
are not only trained, but also assessed by qualified trainers and
assessors On The Job in a Solo environment. This Suits our self employed
clients seeking individual registration on completion. Your theory, practical, and
field gas safe engineer training is carried out in your own area, around
your existing commitments, to fit your current timetable and budget, one
on one by the most highly qualified Ex British Gas, Ex-Corgi, and Gas-Safe Registered, NVQ,
Accredited Assessors and Training Instructors in the UK. You won't have
to find a gas safe work placement. We are the work placement, In fact we
are the field trainers and assessors who train and monitor many of the
gas companies and gas engineers who are out there right now and we are
training them to be amongst the top 10% of technically qualified and
successful gas heating maintenance engineers in the UK. That means all
your gas safe training course is direct and specific. This is the One Gas Safe
Course where our Engineering Students are being taught by the
best to be the best and you are being trained on real gas in real
properties in real life, servicing and maintaining real installations.
Our method of gas training,
and on site gas safety awareness delivery also means that the time period for you to be
trained and then assessed is accurate to your own rate of learning and
competency. More importantly, on
successful completion You will be able to work anywhere in the
UK. On completion of this Gas Safe Course many of our students are
starting their careers registered with us so we can gently ease them in
to the field overcoming nerves and confidence issues. More importantly
we are ensuring their entry to the work place is successful and above
all else safe. We are not just offering a gas safe course, we are
providing sales and marketing training, confidence building, and above
all else training engineers to start bringing gas safety awareness to their
customers. Our field gas training and assessment has uncovered a frightening
lapse in this area and it is incredibly important that all new gas engineers
entering this field enter as professionals servicing the publics' and HSE's gas safety needs for greater
gas safety awareness and fewer incidents. Remember We aren't offering a work experience placement with the
engineers we train, or asking you to find your own, we are training you
ourselves to become the gas engineers and trainers of the future. With
the current gas industry changes this is going to be essential. Most
importantly, the last stage of your gas safe course, your post course
gas training is completed while you
are setting up your own gas business and already registered with Gas Safe to
ensure your transition into the field is competent and confident.
We
are offering an assured program of success and gas safe registration, a
1 stop gas training, gas safe course, with on going technical and business
support long after your gas training is complete. We are a small
specialist company training mature students with a real business model,
and as such we are usually oversubscribed. If you are serious about
being a successful gas engineer and would like to enrol on our unique
corgi gas training programme , or one of our gas safe courses, you should reserve your place early to
avoid disappointment.
Gas Safety
Awareness Training Classes at your premises with field training support
running monthly
![]()
So you want to become a Gas
Safe Engineer are you? Well here are a few words of
very good advice
![]() A
typical trainee will complete their gas safe training and start their new career
registered on our kick start program, gas safe registered, and working
on gas with our support, guidance, and under our close and watchful eye.
Most commonly our trainees complete their initial gas training
certificate, field training assessments, and complete their CCN1, CEN1,
WAT1, HTR1, CKR1, and CPA1, assessment certificates that enable them
to register and complete gas safety certificates, install gas
appliances, service and maintain/repair gas boilers, cookers, fires, and
water heaters. In addition most of our gas trainees undertake their boiler
repairs training with us, whilst others go on to train to be trainers
and advisers.
Others go on to undertake full plumbing training or electrical Part P
courses to expand their skills. But most importantly the first thought
should be on your final goal, because with that in hand we can
help you decide whether a plumbing course is necessary as part of your
corgi gas
training, be it before or after your gas safe training course.
With our individual revision programs, training certificates, and
assessments starting at only £35, and new start certificates from
only £570, centre and field trainers throughout the country, we have
a massive range of gas safe training products to suit your every need, no
matter where you are in the country. For engineers wanting to take
plumbing qualifications we have a range of plumbing courses and even
electrical Part P programs. Contact us now to find out more.
CTSGroup
Training (CTS Consultants), are a small, unique gas training firm successfully training only a
very limited number of the future's leading Gas Safe Engineers. If you want
to be one of them we advise you act quickly to reserve your place and
avoid a long waiting list. At Complete Training Solutions our Success is
always your Success.
`
Last
Year We Have Helped over 45 Mature Business Minded Individuals across
the UK, with an average age of 40, Undergo their Gas Training,
Assessment, and Certification, Become Gas Safe Registered, and
Successfully Set Up In Business as Gas Heating Maintenance and
Installation Engineers. If you want to be one of this year's success stories call us now on the
number below, or click on the presentation link below for more detailed
information.
Click on Boxes
Belowow
Tel: 0870 879 0900
24hrs
Sitting Your ACS Core (CCN1) Or Appliance Elements CEN1, CKR1. HTR1, WAT1, MET1, etc, and need a revision program that will build your confidence, and assist you in getting ready for your theory and practical initial assessment or retakes. Then look no further. We offer probably the best and easy to understand tutor supported Instant Access gas safety revision programs imaginable, and they are completely affordable. Within minutes you could be taking our instantly marked multiple choice test papers, which are timed and marked just like the real exam, in real time. It's just like the real thing
Not too hot when it comes to boiler repairs, or system faults. We have the perfect solution. With our proven e-learning programs our gas engineers have excelled when it comes to confidently diagnosing system and boiler faults. Why not join the team of experts. All e-courses come with tests and e-exams where you chose to take them and successful completion will see you being issued with completion certificates. ![]() Need 'On Job'
Gas Training & Assessment or Portfolio Building
This part of
your gas safe training is absolutely essential. To work successfully on gas under
your own registration or in order to successfully seek employment you
need proven experience, and references not just certificates. Let's be honest.
If you came to us for a job just having completed your ACS Certificates
its very unlikely we would put you to work let alone employ you without
a history and proven auditable record of your experience detailing your
experience working
on your own
on gas. We would probably want to see that companies quality
audit history on you too.
We also know
that a work placement unless you are going on to work for that company
does not normally involve much training on gas, let alone a broad, and
varied portfolio of evidence and is unlikely to lead to a successful
career in gas.
We provide a
real-life on job Corgi Gas Training Package that is tied to our Approved Work
Experience Program for Gas Safe Engineers that includes both gas training and
then field assessment by an approved and qualified field assessor.
Your Field
Training includes every area of the domestic gas maintenance business
from Servicing and landlords gas safety inspections to appliance
commissioning. To meet your gas safety audit requirements you will be
trained both in theory and practical and then assessed in real life gas
situations including numerous unsafe situations.
The training
period is dependant on your own experience or lack of it, your desire to
get there and is run part time, one or 2 days a week, or fortnight to
suit, until all your approved training elements, practical, and theory,
and assessment are complete. This can be anything from 4 to 12
week or longer. Since the whole day is spent only on gas, and is being
trained by a qualified and registered Trainer, not just an engineer, the
period of training can be much reduced, but only cumulates in successful
certification when you have proved your competency to our field
assessors with little or no supervision.
This is the
most essential part of your gas training, and in-fact Is The key to your
gas safe course success. On
completion you will be able to apply to one of our approved centres to
undertake your ACS Assessments or return to your own centre based
training body to undertake your ACS.
Prices range from £1,800.00 to £3,800.00
Tel: 0870 879 0900 - Senior
Field Consultant: 07891 500 220 - Text a Message
, We
provide much more than work experience and specialise in individuals
aiming to run their own business on successful completion.
Free Phone 0800 118 5928 To Build Your Portfolio Improve Your Skills Now !
CTS
(Consultants) Ltd
Tel: 0870
879 0900 - Senior Field Consultant: 07891 500 220
Offering
Tel: 0870 879 0900 - Senior Field Consultant Mobile: 07891 500 220 FIND A BOILER MANUAL HERE All Service, Maintenance and Installation work must be carried out in accordance with the manufacturer's instructions. How often do you get on site and there is no manual, or data plate? If you are fully mobile the you need this site: Get any manual here along with other helpful support gotoplumbing
Undergoing a plumbing course and need a Brilliant Revision Package?Click on the Images Above to Visit Learnatrade.co.uk Our Friends and Associates Web Site Links
Need Help Financing Your Training Click here Leading Gas Appliance Manufacturers
Gas Training Courses, for Gas Safe registration, for new entrants, portfolios, gas safety management, Quality assurance packages, and Corgi gas, plumbing courses throughout the UK, England, Scotland, and Wales, with Key Centres in Glasgow, Edinburgh, Liverpool, Manchester, Birmingham, London, Essex, Kent, Cardiff, Chester and field training anywhere in the UK. We can arrange a professional on and off job plumbing and gas training course with Gas Safe Registration. Tel: 0800 118 5928
|
|||||||
|
Copyright (c) March 2007 All Rights Reserved CTS Group Training |
||||||||